g24 innovations ltd, wentloog environmental centre, cardiff, uk, cf3 2gh tel:+44 (0) 2920 837 340 www.g24i.com for all prototype samples e-mail: sales@g24i.com dye sensitised indoor photovoltaic module parameter symbol condition typical minimum maximum units open circuit voltage voc 200 lux 2.24 2.17 2.31 v 1000 lux 2.50 2.45 2.55 short circuit current isc 200 lux 109 105 113 a 1000 lux 524 498 551 operating voltage vop 200 lux 1.81 1.74 1.89 v 1000lux 2.03 1.96 2.09 operating current iop 200 lux 97 93 101 a 1000 lux 476 454 497 bend radius br - 30 - - mm thickness d - 0.35 - - mm mass m 0.06 gcm -2 f36w-827 fluorescent tubes G0090; iss02 this evaluation module is intended for development, demonstration or evaluation purposes only. g24i does not provide this module as a fnished product ft for general use. persons handling the module must have electronics training and observe good engineering practice standards. g24i reserves the right to change the module specifcation at any time. g24is dye sensitised indoor photovoltaic modules have been optimised to work under indoor lighting providing the highest power density. n.b. all dimensional measurements shown are approximate. performance specifcations shown maybe subject to variation. physical characteristics maybe subject to change. longitudinal bend radius spec (r long ) lateral bend radius spec (r lat ) all samples supplied are prototype subject to customer specifcation. f l e x i b l e n.b.image not to scale 61mm 100mm ve ve + _ r long =100mm r lat = +/-1.0mm +1.0mm -1.0mm indy4100 data sheet power connections are suitable for crimp connection or soldered connection with the appropriate use of heat-shunt tweezers to ensure minimal heating of the polymer material.
|
